Stabilization of bioethanol recovery with silicone rubber‐coated ethanol‐permselective silicalite membranes by controlling the pH of acidic feed solution

In order to produce highly concentrated bioethanol by pervaporation using an ethanol‐permselective silicalite membrane, techniques to suppress adsorption of succinic acid, which is a chief by‐product of ethanol fermentation and causes the deterioration in pervaporation performance, onto the silicalite crystals was investigated. The amount adsorbed increased as the pH of the aqueous succinic acid solution decreased. The pervaporation performance also decreased with decreasing pH when the ternary mixtures of ethanol/water/succinic acid were separated. Using silicalite membranes individually coated with two types of silicone rubber, pervaporation performance was significantly improved in the pH range of 5 to 7, when compared with that of non‐coated silicalite membranes in ternary mixtures of ethanol/water/succinic acid. Moreover, when using a silicalite membrane double‐coated with the two types of silicone rubber, pervaporation performance was stabilized at lower pH values. In the separation of bioethanol by pervaporation using the double‐coated silicalite membrane, removal of accumulated substances having an ultraviolet absorption maximum at approximately 260 nm from the fermentation broth proved to be vital for efficient pervaporation. Copyright © 2005 Society of Chemical Industry     

Pancyclicity of recursive circulant graphs

In this paper, we study the existence of cycles of all lengths in the recursive circulant graphs, and we show a necessary and sufficient condition for the graph being pancyclic and bipancyclic.     

A stacking mechanism for setting bills upright in an automated teller machine

 To deal with circulated bills in various conditions regarding size, shape, and rigidity, we have developed a new bill-stacking cassette that can accept and re-dispense various-sized bills. This cassette stacks the bills upright by using deforming guides and sheet rollers under our newly developed “phase control”. It was experimentally verified by stacking tests that the cassette can handle bills in various conditions; thus, we conclude that the new cassette is practical for stacking circulated bills and re-dispensing them securely. Received: 14 August 2001/Accepted: 11 December 2001     

Controlled undercooling of liquid iron in contact with ZrO2 and MgO substrates under varying oxygen partial pressures

The objective of this study is to determine the conditions under which the inclusions present in liquid steel can act as heterogeneous nucleants for solidification. In order to study the factors that define the undercooling of a given metal/oxide couple, the undercooling of a pure iron sessile droplet in contact with Al₂O₃, ZrO₂, and MgO substrates was measured under controlled oxygen partial pressures by observing droplet recalescence. The results showed that the undercooling of iron, in contact with a particular substrate, did not have a unique value, but was significantly affected by the oxygen content on the gas phase. For oxygen partial pressures between 10⁻²¹ and 10⁻¹⁹, the undercooling of iron on ZrO₂ substrates was stable and around 290 °C. In the same range of oxygen partial pressure, the undercooling of iron on MgO substrates remained below 100 °C due to the low stability of this oxide. At lower oxygen contents, substrate decomposition might be the cause for the observed drop in the undercooling of iron on ZrO₂ substrates to below 100 °C. The undercooling also decreased for increasing oxygen content as verified when the gas was changed from gettered Ar/Ar-H₂ to CO/CO₂ mixtures. The variation in undercooling was related to the wetting of the substrate by the liquid metal, where the deep undercooling observed in the ZrO₂ experiments occurred when the highest contact angle between the liquid metal and the substrate was achieved.     

Preface

Multimedia Tools and Applications -     

A delay-encoding-logic array processor for dynamic-programming matching of data sequences

Computationally very expensive dynamic-programming matching of data sequences has been directly implemented in a fully-parallel-architecture VLSI chip. The circuit operates as digital logic in the signal domain, while analog processing is carried out in the time domain based on the delay-encoding-logic scheme. As a result, a high-speed low-power best-match-sequence search has been established with a small chip area. The typical matching time of 80 ns with the power dissipation of 2 mW has been demonstrated with fabricated prototype chips.     

Human papillomavirus investigation of patients with cervical intraepithelial neoplasia 3, some of whom progressed to invasive cancer

Unstable expansion of the CTG repeats in the 3' untranslated region encoding a member of the protein kinase family in the q13.3 band on chromosome 19 is a mutation specific for myotonic dystrophy. To examine the correlation between clinical expression and CTG trinucleotide repeat length, we carried out Southern blot analysis in a family with myotonic dystrophy. In this pedigree, the expanded CTG repeats were transmitted maternally. The mother had three female children. The mother had about 200 CTG repeats, and the number of repeats for each child was about 800, 1500 and 1600 in birth order. The mother and the patient with 800 repeats were unaware of muscle weakness or myotonia. Symptoms were present from age 3 years in the patient with 1500 repeats and from birth in the one with 1600 repeats. Although the mother menstruated regularly, the patients with 800 and 1500 repeats both menstruated irregularly, and the one with 1600 repeats has never menstruated. The age of onset and severity of the disease were correlated with the size of the expanded repeats. Endocrinological studies revealed that the basal levels of the gonadotropins, PRL and E2 were within normal range, and a pituitary response to LHRH was observed. These data suggest that the amenorrhea and menstrual irregularities were caused by a suprahypophyseal dysfunction. When expanded CTG repeats are transmitted maternally, abnormal products resulting from the metabolic disturbance in the affected mother may harm the fetus in utero. A heterozygous fetus, who has more CTG repeats, may be unable to metabolize the pathologic products sufficiently and therefore may become more severely affected. This may explain the exclusive maternal transmission of congenital myotonic dystrophy.     

STEAM DRYING TECHNOLOGIES: JAPANESE R&D

This report reviews some fundamental and practical aspects of steam drying technologies based mainly on studies published in Japan. Steam drying kinetics, and some industrial technologies particularly for drying of foods, textiles and sludges are reviewed with focus on quality of dried material, drying time, dryer selection and energy recovery from steam dryer exhaust. For energy recovery, heat pump technologies are outlined along with characteristics of different types of steam compressors. A new process is proposed for steam drying; it combines a direct-indirect dryer followed by a direct steam dryer for internal moisture removal.     

Fibre diameter estimation based on guided acoustic wave Brillouin scattering

A guided acoustic wave Brillouin scattering technique has been applied to the nondestructive estimation of fibre outer diameter. The measured diameter has been compared with that obtained by the NFP method.<>